Easybold

The Easybold ACM was developed to offer a balance between technical performance and commercial versatility, being recommended for commercial façades, visual communication and medium-sized exterior applications.

Its composite aluminum structure provides lightness and ease of handling, without compromising the stability required for exterior installations. Easybold works with a standard thickness of 3 mm, meeting most architectural and visual applications.

One of its main differentials is the Super Polyester paint, which provides greater resistance to UV radiation and weathering compared to conventional polyester. The material allows easy cutting, bending and machining, being compatible with the main production processes on the market.

• Sheets must be stored in a covered, dry place, protected from direct sun exposure before installation.
• Avoid excessive stacking that may cause deformations or marks on the material.
• During transport, ensure full support of the sheets to prevent damage and bending.
• Recommended for indoor applications and protected areas, using compatible fastening systems and allowing clearances for thermal expansion.
• The protective film must be removed right after installation.
• Cleaning must be carried out with water and neutral detergent, using soft cloths.
• Avoid abrasive products and aggressive solvents.

• ACM thickness 3 mm
• Aluminum thickness of the colored face 0.21 mm
• Aluminum thickness of the back face 0.18 mm
• Aluminum thickness variation ±0.02 mm
• Weight 3.8 kg/m2
• Length variation tolerance -3 / +3 mm
• Width variation tolerance – 2 / +2 mm
• Width variation tolerance ± 0.20 mm
• Longitudinal roughness ≤3
• Coating flexibility 2T
• Impact resistance 50 Kg/m² – No peeling and no
  cracking
• Abrasion resistance 10.3 L/um
• Resistance to pollutants 3.18%
• Scrub resistance No changes in up to 1000 cleanings
  involving scrubbing
• Acid resistance 1.48 ΔE
• Alkali resistance 0.19 ΔE
• Flexural strength 151 Mpa
• Flexural elastic modulus 7×10^4 Mpa
• Penetration resistance 8.65 KN
• Shear strength 28 Mpa
• Peel strength 164 Mpa
• Thermal expansion coefficient 1.28×10^-5 °C^-1
• Core made of recycled Polyethylene 1.18 g/cm³
• Paint Polyester
• Paint thickness 15 to 18 μm
• Allowed color variation △ ≤2.0
• Cleaning processes before painting Degreasing and Chromating
• Gloss ±10%
• Temperature resistance From -50 to 95°C
• Heat distortion temperature 102°C
• Fire performance C