Acrylic
Eco Acrylic
Eco Acrylic combines the visual and mechanical qualities of traditional acrylic with production processes aimed at reducing environmental impact. Versatile and consistent, it is suitable for indoor applications that align technical performance with more responsible choices, without compromising the finish and aesthetic quality.
Technical specifications
Produced in polymethyl methacrylate (PMMA) with the use of recyclable components and processes aimed at reducing environmental impact. It maintains the mechanical and optical properties of conventional acrylic, with equivalent technical performance where there is no climatic requirement and high luminance. Its performance is suitable for indoor projects.
Available in thicknesses between 1 mm and 15 mm, the material has an approximate density of 1.19 g/cm³ and light transmission of up to 92% in colorless versions. It has good impact resistance and stable thermal behavior between –40 °C and 80 °C.
Compatible with laser cutting, CNC milling, thermoforming, polishing and gluing, it allows interior applications while maintaining dimensional stability and uniform finish.
Advantages
Eco Acrylic preserves the technical and visual properties of conventional acrylic in indoor applications, with a lower environmental impact. Its composition supports a wide range of uses in projects aligned with environmental criteria, while maintaining consistent performance and a high-quality finish.
It offers dimensional stability and performs well in production processes, delivering reliable results for interior architecture, design, and visual communication solutions.
Sustainability
High Mechanical Strength
Transparency
Premium Aesthetics
Usage Recommendations
• Store the sheets in a covered, dry place protected from direct sun exposure before installation.
• Avoid excessive or improper stacking that could cause deformation.
• During transport, ensure full support of the sheets, preventing bending and impacts.
• For outdoor use, it is recommended to evaluate other products appropriate for high weather exposure.
• During installation, use fastening systems compatible with PMMA, respecting the clearances for thermal expansion.
• The use of adhesives and profiles suitable for avoiding localized stresses is recommended.
• Periodic cleaning should be done with water and neutral detergent, using soft cloths.
• Avoid abrasive products, aggressive solvents or stiff brushes.
Technical information
- Thickness 2 mm
- Width 1000 mm
- Length 2000 mm
- Specific Gravity (ASTM D-792:2000) 1.19-1.2
- Relative Density (ISO 1183) 1.2
- Water Absorption Rate in 24 hours (ASTM D-570 DSAS) 0.3%
- Vicat Softening Point (ASTM D-1525 2006) ≥105°C
- Heat Deflection ASTM D-658 ≥78°C
- Flammability (ASTM D-635:2003)
- Linear Expansion Coefficient (ASTM D-831:2006) 6×10-5%
- Flexural Strength (ASTM D-638:2003) 1050 MPa
- Elongation at Break (ASTM D-638:2003)
- Flexural Modulus (ASTM D-790:2003)
- IZOD Impact Resistance (ASTMD-256:2000) ≥16kg/m3 (J/M)
- Impact Force (ASTM D-790:2003) 90-130MPa
- Rockwell Hardness (ASTM D-785:2003) 90 M SCAKE
- Total Light Transmittance (ASTM D-658) 92%
- Haze (ASTM D-635:2003)
- Flexural Resistance (ASTM D-831:2006)
Talk to our specialists
And discover how our cladding solutions can add even more value to your projects!
Get in Touch